In rare cases, a radio station can broadcast incorrect
information that causes the radio features to work
improperly. If this happens, contact the radio station.
Playing the Radio
O
(Power/Volume): Press to turn the system on
and off.
Turn to increase or decrease the volume.
Speed Compensated Volume (SCV): Radios with
SCV automatically adjusts the radio volume to
compensate for road and wind noise while driving. That
way, the volume level should sound about the same
while driving. To activate SCV:
1. Set the radio volume to the desired level.
2. Press the MENU button to display the radio
setup menu.
3. Press the pushbutton under the AUTO VOLUM
(automatic volume) tab on the radio display.
4. Press the pushbutton under the desired Speed
Compensated Volume setting (OFF, Low, Med,
or High) to select the level of radio volume
compensation. The display times out after
approximately 10 seconds. Each higher setting
allows for more radio volume compensation at faster
vehicle speeds.
AudioPilot
®
: If the vehicle has the Bose
®
audio
system, it has AudioPilot noise compensation
technology.
To use AudioPilot:
1. Set the radio volume to the desired level.
2. Press the MENU button to display the radio
setup menu.
3. Press the pushbutton located under the AUTO
VOLUM tab on the radio display.
4. Press the ON or OFF button to turn this feature on
or off.
When turned ON, AudioPilot continuously adjusts the
audio system equalization, to compensate for
background noise, so that the music always sounds the
same at the set volume level.
The feature is most effective at lower radio volume
settings where background noise can affect how well
you hear the music being played through the vehicle’s
audio system. At high volume settings there might
be little or no adjustments by AudioPilot. For more
information on AudioPilot, visit bose.com/audiopilot.
4-93
To Next Page
Loading...
Need help?
General
