3. Remove the wheel blocks (A) attached
to the jack (E) by turning the wing nut (C)
counterclockwise. Place the wheel blocks where
needed as indicated in previously in this section.
The tools for changing a flat tire are located in the
passenger's side top-box storage unit.
To remove the tools, do the following:
1. Open the top door on the passenger's side top-box
storage unit. Use the ignition/door key to unlock it if
it is locked. See Top-Box Storage
on page 3‑76
for more information.
2. Remove the black pouch from the storage box.
You now have all of the tools you will need to lower
the spare tire and change a flat.
To access the spare tire:
A. Spare Tire (Valve
Stem Pointed Down)
B. Hoist Assembly
C. Hoist Cable
D. Tire/Wheel Retainer
E. Hoist Shaft
F. Hoist End of
Extension Tool
G. Hoist Shaft
Access Hole
H. Wheel Wrench
I. Jack Handle
Extension(s)
J. Spare Tire Lock
7-81
Ofrecido por www.electromanuales.com
To Next Page
Loading...
