2-56 Seats and Restraints
2.2. Route, attach and tighten
the top tether according
to your child restraint
instructions and the
following instructions:
If the rear outboard seating
position you are using has
an adjustable head restraint
and you are using a dual
tether, route the tether
around the head restraint.
If the rear outboard seating
position you are using has
an adjustable head restraint
and you are using a single
tether, raise the head
restraint and route the
tether under the head
restraint and in between
the head restraint posts.
If the rear center seating
position you are using has
an adjustable headrest and
you are using a dual tether,
lower the headrest down to
its stowed position and
route the tether over the
headrest.
To Next Page
Loading...
Need help?
General
