Vehicle Care 10-101
Notice: Improperly tightened
wheel nuts can lead to brake
pulsation and rotor damage. To
avoid expensive brake repairs,
evenly tighten the wheel nuts in
the proper sequence and to the
proper torque specification. See
Capacities and Specifications on
page 12‑2 for the wheel nut
torque specification.
15. Tighten the wheel nuts firmly in
a crisscross sequence as
shown.
Storing a Flat or Spare Tire
and Tools
{
WARNING
Storing a jack, a tire, or other
equipment in the passenger
compartment of the vehicle could
cause injury. In a sudden stop or
collision, loose equipment could
strike someone. Store all these in
the proper place.
Storing the Flat Tire with a Flat
Load Floor (Sedan)
1. Put back all tools as they were
stored in the rear storage
compartment and put the
compartment cover back on.
2. Put the flat tire in the tire storage
bag, if there is one.
3. Place the tire, lying flat, in the
rear storage compartment.
A. Cargo Tie-Down
B. Hook
C. Loop
4. Route the loop end of the
strap (C) through one of the
cargo tie-downs (A) located in
the rear of the vehicle.
5. Route the hook (B) through the
loop (C).
6. Pull the strap to tighten it around
the cargo tie-down (A).
To Next Page
Loading...
Need help?
General
