Cadillac 2015 CUE Infotainment System - RSE Controls and Operation

Black plate (24,1)
Cadillac CUE Infotainment System - 2015 - crc - 7/1/14
24 Infotainment System
To play music via Bluetooth:
1. Power on the device, and pair to
connect the device.
2. Once paired, go into the audio
application from the Home Page
or via the applications tray.
Select MEDIA until Bluetooth
displays.
Bluetooth Audio Menu
Press the MENU screen button to
display the Bluetooth Audio menu.
The following may be available:
Bose AudioPilot: If equipped,
press to turn Bose AudioPilot on or
off. AudioPilot is an On/Off selection
on the list entry from the Main
menu. See AM-FM Radio on
page 11.
Tone Settings: Press + or − to
adjust Bass, Midrange, Treble,
or Surround. See AM-FM Radio on
page 11.
Press
[ Back to go back to the
previous menu.
Manage Bluetooth Devices: Press
to go to the Bluetooth page to add
or delete devices or pair.
When selecting Bluetooth audio, the
radio may not be able to launch the
audio player on the connected
device to start playing. When the
vehicle is not moving, use the
phone to begin playback.
All devices launch audio differently.
When selecting Bluetooth audio as
a source, the radio may show as
paused on the screen. Press play
on the device or press
r on screen
to begin playback.
Some phones support sending
Bluetooth music information to
display on the radio. When the radio
receives this information, it will
check to see if any is available and
display it. For more information
about supported Bluetooth features,
see www.gm.com/bluetooth.
Rear Seat
Infotainment
Rear Seat Entertainment
(RSE) System
The vehicle may have an RSE
system. The RSE system includes
Blu-ray/DVD/CD player, USB (if
equipped), SD card reader (if
equipped), audio/video jacks, wired
headphone jack, wireless
headphones (if equipped), and
remote control.
Before Driving
The RSE can only be viewed on the
front screen when the vehicle is in
P (Park). The driver cannot safely
view the video screen while driving.
In severe or extreme weather
conditions, the RSE system may not
work until the temperature is within
the operating range of above −20°C
(−4°F) and below 55°C (131°F).