90 Infotainment System
Voice Recognition for the
Phone
“Call <contact name>”: Initiate a
call to an entered contact. The
command may include location if
the contact has location numbers
stored.
“Call <contact name> At Home,”
“At Work,” “On Mobile,” or “On
Other”: Initiate a call to an entered
contact and location at home, at
work, on mobile device, or on
another phone.
“Call <phone number>”: Initiate a
call to a standard phone number
seven or 10 digits in length, and
also 112.
“Pair go to phone”: Begin the
Bluetooth pairing process. Follow
instructions on the radio display.
“Redial”: Initiate a call to the last
dialled number.
“change phone”: Select a
different phone for outgoing calls.
“call international”: Begin a
dialogue to enter special numbers
like international numbers. The
numbers can be entered in groups
of digits with each group of digits
being repeated back by the system.
If the group of digits is not correct,
the command “Delete” will remove
the last group of digits and allow
them to be re-entered. Once the
entire number has been entered, the
command “Call” will start dialling the
number.
“call voice mail”: Initiate a call to
voice mail numbers.
Voice Pass-Thru
Voice pass-thru/Siri
®
Eyes Free
allows access to the voice
recognition commands on the
mobile phone, for example, Siri or
Voice Command. See the mobile
phone manufacturer's user guide to
see whether the mobile phone
supports this feature. To activate the
phone voice recognition system,
press and hold
g on the steering
wheel for a few seconds.
This enhances the normal use of
Siri. Siri allows access to text
messages, calendars, and audio
sources such as iTunes.
To Next Page
Loading...
