Vehicle Care 10-57
Use the following tools:
1. Jack
2. Wheel Blocks
3. Jack Handle
4. Jack Handle Extensions
5. Wheel Wrench
To access the spare tyre, refer to
the following graphics and
instructions:
1. Hoist Assembly
2. Hoist Shaft
3. Hoist Shaft Access
Cover/Hole
4. Jack Handle Extensions
5. Wheel Wrench
6. Spare Tyre Lock
7. Hoist End of Extension Tool
8. Hoist Shaft Access Hole
9. Spare Tyre (Valve Stem
Pointed Down)
10. Tyre/Wheel Retainer
11. Hoist Cable
1. Open the hoist shaft access
door (3) on the bumper to
access the spare tyre lock (6).
If equipped with a hitch cover,
turn the hitch cover retainers
anti-clockwise and pull the cover
downward to remove it before
removing the hoist shaft
access door.
2. To remove the spare tyre lock
(6), insert the key located inside
the remote, turn it clockwise,
and then pull it straight out.
To Next Page
Loading...
