DRIVING AND OPERATING 187
The following is a DIC display
description and the recommended
usage of each mode:
PTM 1 – WET
.
Intended for all driver skill levels.
.
Wet or damp conditions only —
not intended for use in heav y rain
or standing water.
.
StabiliTrak/ESC is on and engine
power is reduced based on
conditions.
PTM 2 – DRY
.
For use by less experienced drivers
or while learning a new track.
.
Dry conditions only.
.
StabiliTrak/ESC is on and engine
power is slightly reduced.
PTM 3 – SPORT 1
.
For use by drivers who are familiar
with the track.
.
Dry conditions only.
.
Requires more driving skill than
mode 2.
.
StabiliTrak/ESC is on and more
engine power is available than in
mode 2.
PTM 4 – SPORT 2
.
For use by drivers who are familiar
with the track.
.
Dry conditions only.
.
Requires more driving skill than
modes 2 or 3.
.
StabiliTrak/ESC is off and available
engine power is the same as
mode 3.
PTM 5 – RACE
.
For use by experienced drivers
who are familiar with the track.
.
Dry conditions only.
.
Requires more driving skill than in
other modes.
.
StabiliTrak/ESC is off and engine
power is available for maximum
cornering speed.
Press and release
g to turn off PTM
and return to the TCS and StabiliTrak/
ESC systems. The traction off light
i
and StabiliTrak Off light i will
go out.
Limited-Slip Differential
If equipped, the Electronic
Limited-Slip Differential (eLSD) is
automatically activated. eLSD actively
monitors vehicle sensors and driver
inputs to determine the amount of
change for the conditions. With eLSD,
the vehicle has:
.
Enhanced high-speed control.
.
Improved traction through
corners, allowing more
acceleration.
.
More precise steering.
.
Increased vehicle agility.
.
Integration with StabiliTrak/
Electronic Stability Control (ESC).