10 In Brief
Power Liftgate Operation
On vehicles with a power liftgate,
the switch is on the driver door. The
vehicle must be in P (Park) to use
the power feature. The taillamps
flash when the power liftgate
moves.
Choose a power liftgate mode by
turning the dial on the switch until
the indicator lines up with the
desired position. Press the center of
the switch.
The three modes are:
MAX : The liftgate opens to the full
open height.
3/4 : The liftgate opens to a reduced
height that can be set by the vehicle
operator in a range of approximately
three-quarters open to full open.
OFF : The liftgate only operates
manually in this position.
See Liftgate 0 37.
Windows
Press or pull the switch, part of the
way, to open or close the window.
Press the window switch fully and
release to activate the
express-down feature. If equipped,
the express-up feature allows the
window to be raised without holding
the switch. Pull the window switch
up fully and release to activate.
Press
Z { to activate the window
lockout on the rear doors.
See Power Windows 0 46.
Remote Window Operation
If equipped, remote operating
windows will open all the windows
from outside the vehicle by pressing
and holding
K on the Remote
Keyless Entry (RKE) transmitter.
See Power Windows 0 46.
To Next Page
Loading...
