Cadillac XT5 2021 - Front Seat Adjustment and Memory; Setting Seat Memory Positions; Recalling Seat Memory Positions; Rear Seat Adjustments

14
FRONT SEATS REAR SEATS
SET FRONT SEAT MEMORY POSITIONS
♦
With the ignition On or in Accessory mode:
1. Adjust the driver’s
seat, power steering
column and power
outside mirrors to the
desired positions.
2. Press and release the
SET buon on the
driver’s door. A beep
will sound.
3. Immediately press
and hold buon 1 or 2 until two beeps sound. Use the buon
that matches the Driver Information Center welcome message
indicating driver 1 or 2.
To store seat and power steering column positions for more
clearance when exiting the vehicle, repeat the steps using the
Exit buon instead of buon 1 or 2.
RECALL FRONT SEAT MEMORY POSITIONS
Press and hold buon 1, 2 or Exit until the set position is
reached.
e memory/exit positions can be programmed to be recalled
automatically when the ignition is turned on/o (for exit recall,
thedriver’s door must be opened).
To set the automatic recall options, go to Seings > Vehicle >
Seating Position > Seat Entry Memory and Seat Exit Memory.
See Seats and Restraints in your Owner’s Manual.
SLIDE THE REAR SEAT
Li the bar (A) under the
seat cushion to slide the
seat forward or rearward.
RECLINE THE REAR SEAT
To recline the seatback,
pull the lever (B) on top of
the seatback and move
the seatback to the
desired position. Release
the lever.
FOLD THE REAR SEATBACK
Press the buon (C) on the
boom of the head
restraint post to lower the
head restraint.
Pull the lever (B) on top of
the seatback and fold the
seatback forward.
From the cargo area, pull
the seat release lever (D)
located on either side of
the cargo area to fold
either seatback.
To raise a seatback, li it
up until it locks in place.
See Seats and Restraints in your Owner’s Manual.
A
B
C
D