14 Keys, Doors, and Windows
Keyless Access
If equipped, the remote key must be within
1 m (3 ft) of the liftgate or door being
opened.
To lock or unlock the vehicle from the
driver door:
.
Press the button on the driver door
handle once to unlock the driver
door only.
.
Press the button again within
five seconds to unlock all doors.
.
Press the button a third time to lock all
doors.
To lock or unlock the vehicle from any
passenger door:
.
Press the button on the passenger door
handle. This will lock or unlock all doors.
See Remote Key Operation 0 7.
Driver Door Key Lock Cylinder Access (In Case
of Dead Battery)
To access the driver door key lock cylinder:
1. Pull the door handle (1) to the open
position and hold it open until the cap
removal is complete.
2. Insert the key into the slot (3) on the
bottom of the cap (2) and lift the key
upward.
3. Move the cap (2) rearward and remove.
4. Use the key in the cylinder.
To replace the cap:
1. Pull the door handle (1) to the open
position and hold it open until the cap
installation is complete.
2. Insert the two tabs (6) at the back of the
cap between the seal (5) and the metal
base (4).
To Next Page
Loading...
