Keys, Doors, and Windows 7
The key, inside the remote key, can be used
for all locks.
To remove the key, press the button on the
side of the remote key, near the bottom,
and pull the key out. Never pull the key out
without pressing the button.
If it becomes difficult to turn the key,
inspect the key blade for debris. Periodically
clean with a brush or a pick.
See your dealer if a new key is needed.
Remote Key
Do not make changes or modifications to
the remote key. This could void
authorization to use this equipment.
If there is a decrease in the remote key
operating range:
.
Check the distance. The remote key may
be too far from the vehicle.
.
Check the location. Other vehicles or
objects may be blocking the signal.
.
Check the remote key's battery. See
“Battery Replacement” later in this
section.
.
If the remote key is still not working
correctly, see your dealer or a qualified
technician for service.
Remote Key Operation
The Keyless Access system allows for vehicle
entry when the remote key is within 1 m
(3 ft). See Keyless Access Operation
following.
The remote key functions may work up to
60 m (197 ft) away from the vehicle.
Other conditions can impact the
performance of the remote key. See Remote
Key 0 7.
Q : Press to lock all doors and the fuel
door. The turn signal indicators may flash
and/or the horn may sound on the second
press to indicate locking. To view available
settings for this feature, touch the Settings
icon on the infotainment home page. Select
“Vehicle” to display the list of available
options and select “Remote Lock, Unlock,
Start”.
If the driver door is open when
Q is pressed
and Unlocked Door Anti-Lockout is enabled,
all doors will lock and then the driver door
will immediately unlock.To view available
settings for this feature, touch the Settings
icon on the infotainment home page. Select
“Vehicle” to display the list of available
To Next Page
Loading...
