Need help?Do you have a question about the Caen N1471 Series and is the answer not in the manual?
Provides an overview of the N1471 programmable HV power supply and its capabilities.
Describes how the N1471 boards are housed in NIM modules.
Details the power requirements for N1471 modules with and without the A1480.
Details the physical layout and connectors of the N1471 series front and back panels.
Details the various connections on the front panel for control and communication.
Details the connections on the rear panel for HV output and test points.
Describes parameters that can be programmed for the module and channels.
Covers operating the module directly via its front panel interface.
Details the procedure for calibrating the current monitor to compensate for offsets.
Covers controlling the module remotely via various communication interfaces and menus.
Details the USB-RS485 communication protocol, command, and response formats.
Details how to select the output polarity for each channel using physical switches.
Explains the function of internal switches for bus termination and signal adaptation.
Details grounding specifications, including floating return and safety earth connections.
Provides an overview of the N1471 programmable HV power supply and its capabilities.
Describes how the N1471 boards are housed in NIM modules.
Details the power requirements for N1471 modules with and without the A1480.
Details the physical layout and connectors of the N1471 series front and back panels.
Details the various connections on the front panel for control and communication.
Details the connections on the rear panel for HV output and test points.
Describes parameters that can be programmed for the module and channels.
Covers operating the module directly via its front panel interface.
Details the procedure for calibrating the current monitor to compensate for offsets.
Covers controlling the module remotely via various communication interfaces and menus.
Details the USB-RS485 communication protocol, command, and response formats.
Details how to select the output polarity for each channel using physical switches.
Explains the function of internal switches for bus termination and signal adaptation.
Details grounding specifications, including floating return and safety earth connections.
General| Number of Channels | 1 |
|---|---|
| Remote Sensing | Yes |
| Input Frequency | 47 to 63 Hz |
| Interface | Ethernet |
| Compliance | CE |
| Operating Temperature | 0 to 50 °C |
| Storage Temperature | -20 to 70 °C |
| Protections | Overvoltage, Overcurrent, Overtemperature |
To Next Page
