Need help?Do you have a question about the Caen N1471A and is the answer not in the manual?
Provides a general overview of the N1471 module, its features, and capabilities.
Details how the N1471 modules are housed, specifying single width NIM modules.
Lists power requirements for different N1471 board types and configurations.
Illustrates the physical layout and components of the front and back panels of the N1471.
Describes the connectors and controls available on the front panel of the N1471 module.
Details the connectors and test points located on the rear panel of the N1471 module.
Explains the Imon Zoom feature for increased resolution in current monitoring.
Presents a comprehensive table of technical specifications for the N1471 channels.
Details the general board parameters that can be programmed and monitored.
Guides on operating the module locally using the front panel controls and display.
Explains the procedure for calibrating the current monitor to remove offsets.
Describes how to control the module remotely via USB, RS485, or Ethernet.
Details the communication protocol for controlling daisy-chained modules.
Explains how to independently select the output polarity for each channel.
Details the function of internal switches for termination and RS485/RS232 conversion.
Provides guidelines on grounding specifications for safety and noise reduction.
Provides a general overview of the N1471 module, its features, and capabilities.
Details how the N1471 modules are housed, specifying single width NIM modules.
Lists power requirements for different N1471 board types and configurations.
Illustrates the physical layout and components of the front and back panels of the N1471.
Describes the connectors and controls available on the front panel of the N1471 module.
Details the connectors and test points located on the rear panel of the N1471 module.
Explains the Imon Zoom feature for increased resolution in current monitoring.
Presents a comprehensive table of technical specifications for the N1471 channels.
Details the general board parameters that can be programmed and monitored.
Guides on operating the module locally using the front panel controls and display.
Explains the procedure for calibrating the current monitor to remove offsets.
Describes how to control the module remotely via USB, RS485, or Ethernet.
Details the communication protocol for controlling daisy-chained modules.
Explains how to independently select the output polarity for each channel.
Details the function of internal switches for termination and RS485/RS232 conversion.
Provides guidelines on grounding specifications for safety and noise reduction.
General| Input Voltage | 90-264 VAC |
|---|---|
| Input Frequency | 47-63 Hz |
| Voltage Set Resolution | 10 mV |
| Voltage Readback Resolution | 10 mV |
| Operating Temperature | 0°C to +50°C |
| Storage Temperature Range | -20 to +70 °C |
To Next Page
