• Switch the appliance off by pressing the switch (9).
• Switch the appliance on by pressing the switch (9) and holding the button (13) down.
Note:
The buttons (13) and (14) start flashing quickly and the display shows the writing "LS".
• Press the button (13) to set the small beverage dispensing temperature.
Note:
The display (12) shows the writing "S" for 2 seconds and then the default temperature
expressed in "°".
• Press the button (14) to increase the temperature or press the button (13) to decrease it (min.
65 °C / max. 106 °C).
• Press the button (15) in order to memorize the temperature.
• Press the button (14) to set the large beverage dispensing temperature.
Note:
The display shows the writing "L" for 2 seconds and then the default temperature expressed
in "°".
• Press the button (14) to increase the temperature or press the button (13) to decrease it (min.
65 °C / max. 106 °C).
• Press the button (15) in order to memorize the temperature.
• Press the button (15) to exit the temperature setting.
• Switch the appliance off by pressing the switch (9).
• Switch the appliance on by pressing the switch (9) and holding the button (14) down.
Note:
The buttons (13) and (14) start flashing quickly and the display shows the writing "LS".
• Press the button (13) to set the small beverage dispensing portion.
Note:
The display (12) shows the writing "S" for 2 seconds and then the default portion expressed in
"cc".
• Press the button (14) to increase the portion or press the button (13) to decrease it (min. 20
cc / max. 240 cc).
• Press the button (15) in order to memorize the portion.
• Press the button (14) to set the large beverage dispensing portion.
Note:
The display shows the writing "L" for 2 seconds and thon the default portion expressed in
"cc".
• Press the button (14) to increase the portion or press the button (13) to decrease it (min. 20
cc / max. 240 cc).
• Press the button (15) in order to memorize the portion.
• Press the button (15) to exit the portion setting.
To Next Page
Loading...