The formation of lime scale is a natural consequence of using the appliance. De-scaling is necessary
every 5-6 months; if the water is very hard, you need to de-scale the appliance more often. To de-
scale your machine, you can use any commercially available non-toxic, non-harmful de-scaling
product.
• Switch off the appliance.
• Remove the tank and empty it.
• Fill the tank with the de-scaling solution following the instruction on the product package.
• Remove the grill.
• Switch on the appliance.
• Without inserting any capsule, press the button (13) and wait for dispensing to finish. The
water dispensed will be collected in the drip tray (7).
• Switch off the appliance.
• Leave the de-scaling solution in for about 10-15 minutes, with the appliance off.
• Repeat the procedure from point 5 to 7 tilt the de-scaling solution tilt the tank is empty.
• Remove the water tank, rinse it accurately and fill it again with fresh water.
• Switch on the appliance.
• Without inserting any capsule, press the button (13) and wait for dispensing to finish. Repeat
the operation until the tank is emptied. The water dispensed will be collected in the drip tray
(7).
• When the tank is empty, switch off the appliance.
• Fill the water tank again and repeat the procedure from point 12.
• When the second rinsing cycle is complete, fill up the tank again. The appliance will now be
ready for use.
To Next Page
Loading...