Fasteners guide
All the fasteners have metric threads and use Metric tools
1. Piston Pin – use a 5mm allen key
2. Top Pin – use a 3mm allen key both ends
3. Piston plug – use a 6mm allen key
4. Bracket grub screws - use a 2mm allen key
5. Straight fitting - use an 9mm socket
6. Female fitting – use a 13mm spanner
7. Base Plate screws – use a 5mm allen key
8. Elbow fitting – use a 13mm spanner
For lubricating the piston seal and spout o-ring we recommend silicone
grease such as Dow 111.
To Next Page
Loading...