Note:
You can flush the dispenser at any time by using the
procedure described below.
1. Press STOP (A) and then ENTER (B) button, hold
them pressed simultaneously for 2-3 seconds to enter
the cleaning mode.
2. The display will show FLUSHING, press ENTER button
to continue.
Follow the instruction on the display:
PLACE BIN MIN 1L PRESS ENTER TO CONFIRM
3. Place the container under the drink outlets and
press ENTER (A).
4. When you press ENTER the machine will start
flushing all the drink outlets.
CAUTION HOT LIQUIDS is shown in the display.
When done, the dispenser is ready for use.
Warning:
The liquids dispensed by the dispenser are hot! Avoid
scalding! Keep hands and other body parts away from
the dispenser during the cleaning process.
To Next Page