In the STRENGTH menu, you can change the drink strenth for all available drinks at once in the range of
+10% to -10%.
1. Select the STRENGTH menu by using ↑ or ↓ and press ← to access it.
The following message appears on the display:
Strength: + X %
2. Increase or decrease the drink strength using ↑ and ↓ .
3. Confirm the required value with ← . The new cup volume will be accepted immediately.
Note:
If you would like to modify the drink strength again, press ←.
DATE/TIME
You can set the date and time in the DATE/TIME menu.
1. Select the DATE/TIME menu by using ↑ or ↓ and press ← to access it.
The date and time settings are shown on the display. The month setting is flashing.
2. Use ↑ or ↓ to select the correct value.
3. Press ← to got to the next field.
4. Repeat steps 1 and 2 for all fields:
MONTH→ DAY→ YEAR→ HOURS → MINUTES
5. When all fields are set you will see the time.
Note:
If the dispenser has been shut down for longer periods, the date and time must be set again.
CLEANING DAYS
You can set the weekdays that you want to clean or flush the dispenser in the CLEANING DAYS menu.
Select the CLEANING DAYS menu by using ↑ or ↓ and press ← to access it.
There are two submenus:
• CLEANING - set "Clean" days
• FLUSHING - set "Flush" days
Caution:
It is mandatory to run the "Cleaning" program at least once a week to guarantee food safety. In addition,
Coffee-Milk versions also need to run the "Cleaning" program at least twice a week.
To Next Page
Loading...