Cagiva mito 525 E3 - Page 25

24
TELAIO
Tipo ...............bitrave con tubolari estrusi e
parti fuse in alluminio;
appendice posteriore con tubi
in acciaio a sezione quadrata.
Ammortizzatore di sterzo.
SOSPENSIONE ANTERIORE
Tipo ................. forcella teleidraulica a steli
rovesciati del Ø40 mm.
Corsa sull’asse gambe ...............120 mm.
SOSPENSIONE POSTERIORE
Tipo .................. progressiva SOFT DAMP
Mono ammortizzatore idraulico
con molla a precarica regolabile.
Corsa ruota ................................133,5 mm
FRENO ANTERIORE
Tipo .......................a disco fi sso ø 320 mm
con comando idraulico e
pinza fi ssa
FRENO POSTERIORE
Tipo .......................a disco fi sso ø 230 mm
con comando idraulico; pinza fi ssa
CERCHIO ANTERIORE
Tipo ................................... in lega leggera
Dimensioni ................................ 3,00’’x17’’
CERCHIO POSTERIORE
Tipo ................................... in lega leggera
Dimensioni ................................ 4,00’’x17’’
FRAME
Type . ...................twin-beam with extruded
tubes and cast aluminium parts.
Tailpiece made in square section
steel tubes.
Steering damper.
FRONT SUSPENSION
Type ................... telescopic-hydraulic fork
reversed rods. Rods Ø40 mm.
Stroke on the legs axis .................120 mm.
REAR SUSPENSION
Type ...........variable fl exibility SOFT DAMP
with hydraulic single damper
and adjustable preload spring
Wheel stroke ..............................................
133.5 mm. ...................................................
FRONT BRAKE
Type ......................... .fi xed disc ø 320 mm
with hydraulic control;
fl oating caliper
REAR BRAKE
Type ......................... .fi xed disc ø 230 mm
with hydraulic control; fi xed caliper
FRONT RIM
Type ....................................... in light alloy
Size ............................................ 3,00’’x17’’
REAR RIM
Type ....................................... in light alloy
Size .......................................... . 4.00’’x17’’
CADRE
Type ...................à double élément portant
avec tubes extrudés et éléments d’alumi-
nium moulé à section carrée.
Frein direction.
SUSPENSION AVANT
Type ..fourche télescopique- hydraulique à
fourreaux renversés. Fourreau Ø 40 mm.
Course verticale ...........................120 mm.
SUSPENSION ARRIERE
Type ....................SOFT DAMP à fl exibilité
variable. Monoamortisseur hydraulique
avec ressort à précharge réglable.
Course de la roue .....................133,5 mm.
FREIN AVANT
Type ..................... à disque fi xe ø 320 mm
avec commande hydraulique;
étrier fl ottant
FREIN ARRIERE
Type ..................... à disque fi xe ø 230 mm
avec commande hydraulique; étrier fi xe
JANTE AVANT
Type .................................. en alliage léger
Dimensions ............................... 3,00”x17’’
JANTE ARRIERE
Type ................................. en alliage léger
Dimensions ................................. 4,00”x17’’
MITO 525 E3.indd 24MITO 525 E3.indd 24 12-11-2007 15:43:1012-11-2007 15:43:10