To Next PageTo Next Page
Need help?Do you have a question about the Cagiva Mito ev 03 and is the answer not in the manual?
General inspection before operating the motorcycle, covering fuel, coolant, oil, battery levels, steering, tires, chain, and controls.
Emphasizes completing and returning the warranty registration card within 10 days of purchase.
Details on following factory-approved maintenance procedures for optimal performance and warranty.
Instructions for removing body parts to access components for adjustments or maintenance.
Step-by-step guide to removing the headlight fairing.
Instructions for removing the rider and passenger saddles and the rear fairing unit.
Procedure for removing the side panels.
Detailed specifications for the engine, including type, cooling, bore, stroke, displacement, compression, and starting.
Information on engine and transmission lubrication types.
Specifications for the ignition system, including type, timing, and spark plug details.
Explanation of the fuel cock positions (ON/OFF) and the reserve fuel indicator.
Details the throttle/oil pump grip and the right-side switches for engine start and stop.
Describes the fuel cock positions (ON/OFF) and the reserve fuel warning light.
Details the throttle/oil pump grip and the right-side switches for engine start and stop.
Explains the four positions of the ignition switch and steering lock.
Identifies the various warning lights and instruments on the dashboard.
Details the throttle/oil pump grip and the right-side switches for engine start and stop.
Explains the left-side switch controls including passing, lights, turn indicators, horn, and clutch.
Details the left-side switch controls including passing, lights, turn indicators, horn, and clutch.
Instructions for operating the rear brake pedal and its connection to the stop light switch.
Explains the operation of the gear shift lever for changing gears.
Procedure for engaging gears with a stationary engine, including clutch use.
Steps for moving the motorcycle while stationary and disengaged clutch.
Essential checks before riding, including fuel, coolant, oil, battery, steering, tires, chain, and controls.
Detailed procedure for starting a cold engine, including fuel valve, ignition, starter, and controls.
Guidelines for the first 1500 km, including engine warm-up, RPM limits, brake use, and speed maintenance.
Lists common causes for engine failure to start, such as improper technique, empty tank, fouled plug, or flooded carburetor.
Identifies potential issues when the engine starts with difficulty, like spark plug condition or dirty carburetor.
Explains the importance of regular servicing by a CAGIVA dealer for optimal performance and longevity.
Lists operations performed before delivery, such as checking levels and controls.
Specifies maintenance tasks recommended after 1000 km or 6 months.
Specifies maintenance tasks recommended after 6000 km or 12 months.
Specifies maintenance tasks recommended after 12000 km or 24 months.
Specifies maintenance tasks recommended after 24000 km.
Details the engine lubrication system, including the oil pump and recommended oil type (AGIP RACING 2T).
Explains how to check and adjust the oil pump for correct engine lubrication.
Describes how to check and maintain the oil level for the gearbox and primary drive.
Instructions on how to adjust the gear shift lever position for driver comfort.
Procedure for replacing the engine coolant every two years, including draining and refilling.
Steps to check the coolant level in the expansion tank every 1000 km.
Instructions for checking oil levels in brake reservoirs and inspecting hoses for leaks or wear.
Guidance on carburetor adjustment, requiring minimal readjustment after initial setup.
Procedure for adjusting the engine idle speed and mixture, ensuring smooth engine rotation.
Instructions for adjusting the choke cable on the carburetor for proper starting operation.
Steps for accessing, cleaning, and replacing the fuel filter.
Guide to accessing and cleaning the air filter, with frequency recommendations based on usage conditions.
Instructions for spark plug inspection, cleaning, gap adjustment, and replacement.
Procedure for setting the ignition timing, requiring dealer assistance.
Explains the need for cleaning carbon deposits to prevent engine knock and power loss.
Steps for checking and adjusting the drive chain tension and lubricating it.
Instructions for adjusting clutch cable tension and checking idle lever travel.
Guidance on adjusting the clutch lever position and checking its cable slack.
Instructions for adjusting the clutch lever position and its cable slack.
Procedure for adjusting the rear brake pedal, checking for proper lever play.
How to check brake pad wear by examining the thickness against wear indicator notches.
Instructions for checking oil levels in brake reservoirs and inspecting hoses for leaks or wear.
Procedure for replacing the engine coolant every two years, including draining and refilling.
Importance of maintaining the correct oil quantity in both fork legs for proper operation.
Details on adjusting the rear shock absorber's spring preload for desired ride characteristics.
Step-by-step instructions for removing the front wheel, including loosening axle screws and nuts.
Procedure for removing the rear wheel, including loosening the axle nut and chain.
Information on tubeless tires, including proper pressure, tread wear, and avoiding inner tubes.
Specifies the minimum legal tread depth for front and rear tires.
Instructions for lubricating the speedometer drive located on the front wheel.
Lists the components of the electric system, including generator, starter motor, coil, ECU, regulator, and lights.
Reminder to periodically check fuses for contact oxidation and use correct amperage fuses.
Instructions for activating a dry battery, charging, and maintenance.
Warning against starting the engine with the battery disconnected.
Step-by-step guide to replacing headlamp bulbs, including removing guards and covers.
How to replace bulbs for warning lights and instrument illumination.
Instructions for replacing bulbs in turn indicators, tail light, and license plate light.
Procedure for checking and adjusting the headlamp beam alignment.
Lists the standard tool kit provided with the motorcycle for routine maintenance.
Location and function of the helmet lock.
Steps for preparing the motorcycle for long-term storage, including cleaning, fuel draining, and battery care.
Emphasizes the importance of regular servicing by a CAGIVA dealer for optimal performance and longevity.
General| Brand | Cagiva |
|---|---|
| Model | Mito ev 03 |
| Category | Motorcycle |
| Language | English |
