To Next Page
C
Christina HenrySep 7, 2025
Is frosting on the coils of my CAIRE Oxygen Equipment Liberator normal?
- JJoshua FitzpatrickSep 8, 2025
Frosting on the coils of your CAIRE Oxygen Equipment Liberator is normal when breathing off of it.
Is frosting on the coils of my CAIRE Oxygen Equipment Liberator normal?
Frosting on the coils of your CAIRE Oxygen Equipment Liberator is normal when breathing off of it.
How to fix inadequate flow in CAIRE Oxygen Equipment?
To address inadequate flow in your CAIRE Oxygen Equipment, check the following: * Make sure the flow control knob is on the correct flow rate setting. * Ensure the flow control knob is not set between flow rates. * Confirm liquid oxygen is in the unit. * Check if the cannula is kinked or pinched. * Verify the cannula is properly connected to the unit.
What to do if condensation or water pools up on the floor near CAIRE Oxygen Equipment?
If you notice condensation or water pooling up on the floor near your CAIRE Oxygen Equipment, make sure that the condensate bottle is correctly installed and that you empty it as needed.
Why is my CAIRE Oxygen Equipment portable not filling?
If your CAIRE Oxygen Equipment portable is not filling, make sure the reservoir tank has enough liquid. Also, check that the portable device is correctly pushed onto the QDV and the portable vent valve lever is held open. For more information, consult the user manual for your portable liquid oxygen device.
General| Brand | CAIRE |
|---|---|
| Model | Liberator 20 |
| Category | Oxygen Equipment |
| Language | English |
Explains internal symbols used on the equipment and their meanings.
Covers essential safety precautions, warnings, and cautions for device use and environment.
Identifies and describes the main control and connection points of the Liberator unit.
Highlights critical warnings and cautions during the operation of the unit.
Instructions for checking the liquid oxygen level indicator and battery status.
Guidance on attaching the cannula or humidifier bottle to the device.
Guidelines and warnings regarding EMC and RF interference with the device.
Recommended separation distances between RF equipment and the Liberator.
Guidance and declaration for the device's electromagnetic immunity.
Details on immunity test levels for ME equipment and ME systems.
