Changing Brake mode
When the bike has been activated, press the lower button on the display to
change brake mode. You will always change the brake mode, starting from
“Mode 1” to “Mode 2” to “Mode 3” to “Mode C” and back to “Mode 1” again,
one press at a time. The bike will make a dierent sound depending on the
selected brake mode.
Note: If you don’t have brake mode C in the display, but do have a connectivity
module, you need to create an account in the app and configure the custom
brake mode.
WARNING: When riding in trac and utilizing the brake mode, the braking
light will not be activated and alarm other in trac that you are slowing down.
Use with caution and always use the real brakes as a mean to stop your bike
when riding.
Change between Miles per hour and Kilometers per hour
When the bike has been activated. Press and hold the lower button on the
display in order to change between mph and km/h.
Change between odometer and trip meter
When the bike has been activated, press and hold the upper white button on
the display in order to change between odometer and trip meter.
Start and Cancel the trip meter
When the bike has been activated, press and hold the middle button in order
to start a new trip, or to cancel your current trip.
See information about the software and bike information
When you are starting the bike and the display is loading, when you get to
the screen ”Press to start”, press and hold the button on the right side of your
display to access this information. This can be useful during service and ma-
intenance.
To Next Page
Loading...
