EasyManua.ls Logo

Calculated Industries 43285 - Appendix; Calculator Information

Calculated Industries 43285
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Calculator Information
The following default settings are built in to this calculator.
Performing an All-Clear — [Set] [x] — will return your calculator
to these original settings.
12 Periods per Year Month Offset of January (1)
Two Fixed Decimal Places ARM Ratios = 1.00 : 1.00
Qual 1 Ratios = 28% : 36% CAP = “0”
Qual 2 Ratios = 29% : 41% Pro-Mode “Off”
Error Codes
With an incorrect entry or answer beyond the range of the calcu-
lator, the display will show “Error” followed by one-digit numer-
ic code. To clear an error, simply press any key.
Error 1 Number Too Large to Display
Error 2 Attempted to Divide by Zero
Error 3 Time Value of Money Error
Error 4 Invalid Entry
Error 5 Invalid Entry Type
Error 6 Bi-Weekly Error
Error 7 Qualifying Error
Tilt-Up Display
Your calculator is designed with a special “tilt-up” display that you
may move to three different positions for the best viewing angle.
Auto Shut-Off
Your calculator is designed to shut itself off after about 8-12 min-
utes of non-use.
A
PPENDIX
46 – Qualifier Plus
®
IIx DT

Related product manuals