Why is my CalderaSpas Hot Tub water cloudy?
Cloudy water in your CalderaSpas Hot Tub can be due to several factors: dirty filters, excessive oils or organic matter, improper sanitization, suspended particles, or overused water. To resolve this, try cleaning the filters, shocking the spa with sanitizer, adding sanitizer, adjusting the pH and alkalinity, running the jet pumps while cleaning the filters, or draining and refilling the spa.
What to do if my CalderaSpas paradise Hot Tub has a water odor?
If your CalderaSpas Hot Tub has a water odor, it could be caused by excessive organics in the water, improper sanitization, or low pH. You can address this by shocking the spa with sanitizer, adding sanitizer, and adjusting the pH to the recommended range.
How to get rid of algae growth in my CalderaSpas paradise?
Algae growth in your CalderaSpas Hot Tub can occur due to high pH or low sanitizer levels. To fix this, shock the spa with sanitizer and adjust the pH, and also shock the spa with sanitizer again while maintaining the appropriate sanitizer level.
What to do for eye irritation from my CalderaSpas paradise Hot Tub?
Eye irritation in your CalderaSpas Hot Tub can result from low pH or low sanitizer levels. Correct this by adjusting the pH and shocking the spa with sanitizer to maintain the proper sanitizer level.
How to prevent skin irritation or rash from my CalderaSpas paradise Hot Tub?
Skin irritation or rash from your CalderaSpas Hot Tub can be caused by unsanitary water or a free chlorine level above 5 ppm. To remedy this, shock the spa with sanitizer and maintain the sanitizer level. Also, allow the free chlorine level to drop below 5 ppm before using the spa.
Why does my CalderaSpas paradise have a chlorine odor?
A chlorine odor in your CalderaSpas Hot Tub indicates that the chloramine level is too high or the pH is too low. To fix this, shock the spa with sanitizer and adjust the pH to the recommended range.
How to remove organic buildup or scum ring around my CalderaSpas paradise?
An organic buildup or scum ring around your CalderaSpas Hot Tub is typically due to a buildup of oils and dirt. Wipe off the scum with a clean rag. If the buildup is severe, drain the spa, use a spa surface and tile cleaner to remove the scum, and then refill the spa.
How to get rid of musty odor in my CalderaSpas Hot Tub?
A musty odor in your CalderaSpas Hot Tub is often caused by bacteria or algae growth. Shock the spa with sanitizer. If the problem is visible or persistent, drain, clean, and refill the spa.
What causes stains in my CalderaSpas paradise?
Stains in your CalderaSpas Hot Tub can be caused by total alkalinity and/or pH being too low, or high iron or copper content in the source water. You can adjust the total alkalinity and/or pH, or use a metal deposit inhibitor to resolve this.
How to remove scale from my CalderaSpas Hot Tub?
Scale in your CalderaSpas Hot Tub is often due to high calcium content in the water, with total alkalinity and pH being too high. Adjust the total alkalinity and pH. If scale removal is required, drain the spa, scrub off the scale, refill the spa, and balance the water.
Welcomes new owners and introduces the owner's manual, providing space for personal details.
Crucial guidelines to prevent injury and ensure safe spa operation.
Measures to protect children and ensure safe electrical connections.
Warnings on injury, medication effects, health conditions, and hyperthermia.
Importance of clean water and risks of poor sanitation or high temperatures.
Key operational and installation recommendations for safe spa use.
Guidelines for selecting a location and preparing for outdoor installation.
Specifics for deck, basement installation, and spa leveling.
Proper procedures for installing and securing the spa cover for safety.
Critical safety and installation requirements for electrical connections.
Detailed steps for making secure electrical connections and understanding the wiring diagram.
Important warnings and initial steps before filling the spa.
Priming the jet system and balancing water chemistry after filling.
How to use diverter valves, air controls, and jet types for massage customization.
Jet configurations for Makena, Salina, Martinique, and Kauai models.
Explanation of the control panel buttons, functions, and indicator icons.
Adjusting temperature, using locking features, and controlling jets.
Operating lights, summer timer, brightness, language, and audio systems.
Location and identification of spa components on jet pump and control sides.
Procedures for cleaning filters, maintaining diverter valves, and VersaSsage jets.
Steps for draining, preventing freezing, and winterizing the spa.
How to clean and care for spa pillows, exterior shell, cabinet, and cover.
Methods for testing water and essential chemical safety practices.
Adjusting Total Alkalinity, Calcium Hardness, and pH for optimal balance.
Using the FROG system, maintaining sanitizer, and water treatment guides.
A guide to identify and solve common spa water chemistry problems.
Notes on service, warranty invalidation, and customer service contact.
A guide to diagnose and resolve common operational problems.
Covers warranty extent, performance, limitations, and legal remedies.
Technical details and requirements for different Paradise Series spa models.
General| Brand | CalderaSpas |
|---|---|
| Model | paradise series |
| Category | Hot Tub |
| Language | English |
To Next Page
