Calira MES Module A - Charging Characteristic Curve; Assembly



   
      


Lerchenfeldstr. 9



87600 Kaufbeuren



Tel.: 049 (0)8341 9764-0 Fax: 049 (0)8341 67806
30
Use: For charging batteries with a rated voltage of 12 volts and
a capacity of:
55–160 Ah for the MES 250-(1-4) / Module A
90-270 Ah for the MES 400-(1-4) / Module A
Housing: Aluminium, bright, ventilated
Length:
Width:
Height:
340 mm
130 mm
100 mm
Weight: 1.3 kg (13 N)
Charging characteristic
curve
HL =
NL =
EL =
Main charging phase
Post charging phase
Holding charge phase







! 


"#$ #% #
#$%& $$''() '$) 
Assembly
Safety instructions

' , /
,!


Connecting the device to the power supply must comply with the
applicable national installation regulations.

This device contains components that may generate electric arcing and
sparks. Therefore when operating the device in a garage or a similar
location, it must be contained in a room or housing designed for this
purpose!