Setting up your first GigaSpire BLAST u6 (as a residential gateway)
1
2
Connect the GigaSpire BLAST u6 to a power outlet.
Connect one end of the supplied Ethernet cable to one of the LAN ports found
on the back of the Internet access device provided by your service provider (e.g.,
modem, router, gateway) and the other end of the cable to the WAN port on the
back of the BLAST u6.
Ethernet
3
Note: The SSID (network name) of your new
GigaSpire will be 'Calix GigaSpire WiFi’ when the
system has checked into Calix Support Cloud. The
password remains the default setting; as found on
the bottom of your GigaSpire (or on the sticker
that came in your box) beside ‘WPA Key’.
Set up your Calix CommandIQ App
(see page 9 for details).
The solid blue LED indicates you have connectivity to the Internet.
Need help?
Contact support: gigahelp@calix.com
Boot-up time
~4m
To Next Page
Loading...
