Calix GigaSpire BLAST u6 - Using Wired Backhaul

To Next Page

To Previous Page

Setting up your second GigaSpire BLAST u6 (as a satellite)

Using wired backhaul

Connect one end of the

supplied Ethernet cable to the

LAN port found on the back of

the first GigaSpire BLAST u6

and the other end of the cable

to the WAN port on the back of

the second BLAST u6 system.

Ethernet

NOTE: Once pairing is successfully complete,

both BLAST u6 systems will show a solid blue

light (this may take several minutes). You can

then move to step 3.

Set up your Calix CommandIQ App

(see page 9 for details).

Connect the GigaSpire BLAST

u6 to a power outlet.

Other manuals for Calix GigaSpire BLAST u6