Press the Home Touch Button -> select -> select ->
select available camera slot -> press OK Button to confirm ->
a message will display on the screen . The
display unit paring mode times out in 30 seconds.
Plug in the camera and keep it within 1 meter from the display
unit. Double click the pairing key to enter pairing mode, which
is indicated by a rapid flashing of the indicator light . Once it's
connected with the display unit, the indicator light will stay on.
The camera's pairing mode times out in 60 seconds.
1.
2.
Keep pressing the button of the
camera for three seconds to pair
2
Press the Home Touch Button -> select -> select ->
select the target camera slot -> press the OK Button -> select
to confirm deletion, or to cancel the action. The red square is
gone once confirmed deletion .
2
2
2
Note: The red square next to a camera slot, means that slot is
already token by a connected camera.
Add A Camera
*
*
Available slot
Unavailable slot
Delete A Camera
is to view camera 1,
is to view camera 2,
is to automatically switch between camera 1 and 2.
Press the Home Touch Button -> select -> select ->
select the desired option:
Switch Between 2 Cameras
2
10
To Next Page
Loading...
