Need help?Do you have a question about the CAMAG TLC 3 and is the answer not in the manual?
Manual contains warnings and instructions for reliable operation. Improper use voids safety guarantee. AC power inside can cause injury.
Lists the components included with the instrument, such as power cords and the instruction manual.
Check that the power voltage matches that specified on the back of the unit. Figure 1 shows an overview of the TLC Plate Heater III.
To maintain proper functionality, the instrument should be cleaned regularly. Disconnect power before cleaning and ensure it is at room temperature.
If correctly used, the instrument does not need decontamination. Follow safety regulations if used in a manner not specified in the manual.
General| Maximum Temperature | 200 °C |
|---|---|
| Temperature Accuracy/Stability | ±1 °C |
| Temperature Homogeneity | ±1 °C |
| Heating Plate Material | Aluminum |
| Power Supply | 230 V, 50/60 Hz |
| Power Consumption | 400 W |
| Heating Time | 20 minutes to 200 °C |
| Plate Size Compatibility/Heating Plate Size | 20 x 20 cm |
| Temperature Range | Ambient to 200 °C |
To Next Page