Unpacking/Installation
Instruction manual, Nov-17 3
• See original manufacturers' manuals for further safety data on third party
equipment supplied with the system
• The safety of any system incorporate with the equipment is the responsibility of
the assembler of the system
• The use of the instrument without adequate ventilation to outside air may
constitute a health hazard depending on the substances in use
• The open heating plate reaches temperatures up to 200 °C. Improper handling
can cause injures and damage.
• While the heating plate is dangerously hot (down to about 60 °C), its temperature
is shown on the display panel. Therefore do not remove the power cord before the
temperature display has gone out
1.2 Parts supplied
Part no Description
Power cord Switzerland or
2 Unpacking/Installation
Carefully take all components listed in the shipping list as well as accessories out of the
packing. Make sure the shipment is complete.
3 Getting started
3.1 Starting an setting the temperature
Check that the power voltage matches that specified on the back of the unit.
Fig1. Overview of TLC Plate Heater lll
To Next Page
Loading...