Cambium Networks PTP 450 Series User Manual

Chapter 4: Reference information Country specific frequency range
Page
4-100
Table 212 Frequency range per country – 5.4 GHz band PMP/PTP 450 Series
Region
code
Country Code
Channel
BW
Channel center Frequency limits (MHz)
Lower
Upper
Other Any 5 MHz 5472.5 5722.5
10 MHz 5475 5720
15 MHz 5477.5 5717.5
20 MHz 5480 5715
30 MHz 5485 5710
40 MHz 5490 5705
Other-FCC (Any non-US
country that follows FCC
rules
5 MHz 5475 5720
10 MHz 5477.5 5717.5
15 MHz 5477.5 5717.5
20 MHz 5480 5715
30 MHz 5485 5710
40 MHz 5490 5705
Other-ETSI (Any country
that follows ETSI rules
5 MHz
5472.5 5597.5
5652.5 5722.5
10 MHz
5475 5595
5655 5720
15 MHz
5477.5 5592.5
5657.5 5717.5
20 MHz
5460 5590
5640 5715
30 MHz
5485 5585
5665 5710
40 MHz
5490 5580
5670 5705
Oceania Australia
5 MHz
5472.5 5597.5
5652.5 5722.5
10 MHz
5475 5595
5645 5720

Cambium Networks PTP 450 Series Specifications

General

Frequency Bands	4.9 GHz, 5.4 GHz, 5.8 GHz
Channel Width	5 MHz, 10 MHz, 20 MHz, 40 MHz
Modulation	QPSK, 16 QAM, 64 QAM, 256 QAM
Latency	<5 ms
Security	AES Encryption (128-bit)
Ethernet Interface	10/100/1000 Mbps
Ingress Protection	IP67