Need help?Do you have a question about the Cambium PTP 450 series and is the answer not in the manual?
Key safety guidelines for personnel installing or operating PTP 450 equipment.
Regulatory guidelines for PTP 450 operation, including frequency usage and limits.
Provides details on document purpose, version, and contacting Cambium Networks.
Procedures for reporting problems and information on unit repair and service.
Recommendations for configuring security parameters in Cambium systems and equipment.
Explains the use of warnings, cautions, and notes within the Cambium Networks document set.
Introduces key features, typical uses, product variants, and components of the PTP 450.
Describes the BHM unit, its function, and its interfaces.
Details the BHS unit, its function, interfaces, and diagnostic LEDs.
Covers cabling practices and lightning protection requirements for PTP 450 installations.
Explains how the PTP 450 wireless link operates, including modulation and power control.
Introduces the PTP 450 management system, including web interface and software tools.
Guides on planning PTP 450 links to conform to country-specific regulatory restrictions.
Provides scenarios and terminology for migrating to PTP 450 for expanded network capacity.
Factors to consider when selecting sites for PTP 450 equipment, power supplies, and antennas.
Factors for planning links, including range, obstacles, path loss, and throughput.
Methods for analyzing spectrum usage and RF neighbor frequencies for network planning.
Guidance on selecting sites, surveying, clearing radio horizon, and calculating aim angles.
Information on maximizing tower performance by minimizing self-interference and other interference.
Describes grounding and lightning protection requirements for PTP 450 installations.
Details synchronization options for TDD, including GPS and alternatives.
Factors to consider when planning PTP 450 data networks, including IP addressing.
How to plan PTP 450 networks to operate in secure mode, including access and filtering.
Outlines the terms and conditions for using Cambium Software and Documentation.
Details Cambium’s standard hardware warranty terms for PTP 450 products.
States the limitations of Cambium Networks' liability regarding the product and software.
Contains detailed specifications for PTP 450 hardware components.
Detailed physical and performance specifications for the PTP 450 Backhaul Master (BHM).
Detailed physical and performance specifications for the PTP 450 Subscriber Module (BHS).
Specifications for the PTP 450 wireless interface, including RF bands and settings.
Specifications related to the PTP 450 Ethernet interface and data networking features.
Lists safety specifications and describes how to keep RF exposure within safe limits.
Details compliance testing for PTP 450 with US FCC specifications for Class B digital devices.
Provides US FCC IDs and Industry Canada Certification numbers for PTP 450.
Describes PTP 450 compliance with radio regulations in various countries.
Lists radio specification type approvals granted for PTP 450 frequency variants.
Explains Dynamic Frequency Selection requirements for 5 GHz unlicensed systems.
Details the Listen Before Talk feature for 3.6 GHz radios in North America and Canada.
Lists available Country Codes and their impact on radio settings and spectrum.
General| Frequency Bands | 5 GHz |
|---|---|
| Channel Width | 5, 10, 20, 30, 40 MHz |
| Frequency Range | 5150-5970 MHz |
| Operating Temperature | -40°C to +60°C |
| Security | AES Encryption |
| Power Consumption | 10W (typical) |
| Antenna Connector | N-type connector |
| Interface | Gigabit Ethernet |
| IP Rating | IP67 |
| Wireless Standards | 802.11 |
To Next Page
