❷
Transfer Centre Hinge Bracket to the Left
a. Remove the centre hinge bracket and shim by removing the three screws. NOTE:
Keep these screws with the hinge bracket. They are
longer screws and will be used when installing the
hinge on the other side.
b. Remove the three painted screws and take washers
from the centre left side of the cabinet. Screw them
into the holes on the right side, which were
uncovered in Step "a" above.
c. Place the centre hinge bracket and shim over the
holes at the centre left side of the cabinet, insert the
three screws that were removed with the centre
hinge bracket in Step "a" and tighten securely.
Do not install the hinge pin yet.
12
❸
Remove Fresh Food Door
a. Tape the door shut with masking tape.
b. Remove the hinge pin with a 7/32" socket and ratchet.
c. Remove tape and tilt the door away from the cabinet.
Remove and save the washer on the hinge pin.
d. Lift the door straight up to free its bottom socket from
the pin in the bottom hinge bracket.
Plastic
Washer
Hinge Pin
Centre
Hinge
Bracket
Fresh Food Door
To Reverse Hardware on Cabinet
❶
Transfer Bottom Hinge
Bracket to the Left
a. Pull out grille 1" and set down on the
floor to gain access to the hinge bracket
screws.
b. Using a 3/8 Socket, remove the hinge
bracket, screws and plastic washer from
the bottom right side of the cabinet.
c. Remove plug button and screw from the bottom left
side of the cabinet and install at the bottom right.
d. Reinstall the hinge bracket, screws and plastic
washer to the bottom left side of the cabinet.
Plastic Washer
Bottom Right
Reversing the Door Swing
Safety Information
Installation Instructions
Customer ServiceOperating InstructionsTroubleshooting Tips
Bottom Left
Plastic
Washer
Centre Right
Centre Left
To Next Page
Loading...
