To Next Page

To Previous Page

Standalone Keypad/Prox Access Control

To add a user in either card or PIN mode, i.e. in the 3 2 # mode. (Default setting)

To add a Pin user

1 User ID number # PIN #

The ID number is any number between 1 & 2000.

The PIN is any four digits between 0000 & 9999 with

the exception of 1234 which is reserved. Users can be

added continuously without exiting programming mode

as follows:

1 User ID no 1 # PIN # User ID no 2 # PIN #

To delete a PIN user

2 User ID number # Users can be deleted

continuously without exiting programming mode

To change the PIN of a PIN user

(This step must be done out of programming mode)

* ID number # Old PIN # New PIN #

New PIN #

To add a card user (Method 1)

This is the fastest way to enter cards. The user ID

number is automatically generated.

1 Read card #

Cards can be added continuously without exiting

programming mode

To add a card user (Method 2). This is the alternative

way to enter cards using User ID Allocation. In this

method a User ID is allocated to a card. Only one

user ID can be allocated to a single card.

1 ID number # Card #

Users can be added continuously without exiting

programming mode

To add card user (Method 3)

Card number is the last 5-8 digits printed on the

back of the card, user ID number is automatically

generated

1 Card number #

Users can be added continuously without exiting

programming mode

To add a card user (Method 4)

In this method a User ID is allocated to a card

number. Only one user ID can be allocated to the

card number

1 ID number # Card number #

Users can be added continuously without exiting

programming mode

To delete a card user by card. Note users can

be deleted continuously without exiting

programming mode

2 Read Card #

To delete a card user by user ID. This option can

be used when a user has lost their card

2 ID number #

To delete a card user by card number.

This option can be used when the user want to

make the change but the card has been lost

2 Card number #

Note users can be deleted continuously without exiting

programming mode

Page 5 of 8

Brand	CAMDEN
Model	CV-110SPK
Category	IP Access Controllers
Language	English

CAMDEN CV-110SPK User Manual

Table of Contents

Questions and Answers:

CAMDEN CV-110SPK Specifications