CAMDEN CV-110SPK User Manual

Standalone Keypad/Prox Access Control
To add a card and PIN user in card and PIN mode ( 3 1 # )
To Add a card and Pin user
(The PIN is any four digits between 0000 & 9999
with the exception of 1234 which is reserved.)
Add the card as if for a card user. See page 5
Press * to exit from the programming mode
Then allocate the card a PIN as follows:
* Read card 1234 # PIN # PIN #
To change a PIN in card and PIN mode (Method 1)
Note that this is done outside the programming mode
so the user can do this themselves
* Read Card Old PIN # New PIN #
New PIN #
To change a PIN in card and PIN mode (Method 2)
Note that this is done outside the programming mode
so the user can do this themselves
* ID number # Old PIN # New PIN #
New PIN #
To delete a Card and PIN user just delete the card
2 User ID #
To add a card user in card mode ( 3 0 # )
To Add and Delete a card user
The operating is the same as adding and deleting
cards in mode 3 2 #
To delete All users
To delete ALL users. Note: This removes all user
codes.
2 0000 #
To unlock the door
For a PIN user
Enter the PIN then press #
For a card User
Read card
For a card and PIN user
Read card then enter PIN #
Page 6 of 8

CAMDEN CV-110SPK Specifications

General

Brand	CAMDEN
Model	CV-110SPK
Category	IP Access Controllers
Language	English