11
All the data and information contained herein is considered subject to change at any time and at our discretion
ENGLISH
5) Secure the chain-tensioning transmission from the opposite side
of the ratiomotor, in line with the pinion.
CAME
R
9) Secure the appropriate attachments (brackets and plates) fi rst
to the chain and then to the wings.
6) Insert the ½ inch chain (CCT) with a length of twice
distance A.
7) Unite the two ends with a coupling (CGIU).
8) Adjust the chain’s tension with the
transmission’s screw and then tighten the nuts.
1
2
A
To Next Page
Loading...
