All the data and information contained herein is considered subject to change at any time and at our discretion
18
ENGLISH
1) After completing assembly and electrical connections, make a hole with
a Ø 13 mm bit in the cover in the point indicated.
5.11 Assembly cover
2) Anchor the cover with the four screws provided.
3) Insert the release handle into the hole and fasten it with the washer
and the screw.
CAME
#!-%
5.12 Manual actuating device
5.13 Emergency release
Manually-operated winch for sectional doors (optional).
A chain-operated device for opening and closing the sectional door, it can be used both when
the automation is either horizontal or vertical.
Devices for releasing the ratiomotor by personalised wrench (CMS)
or with lever complete with suspended-cord transmission (C002).
C002
CMS
#!-%
CA
ME
C001
#!-%
#!-%
2
To Next Page
Loading...
