CAME CBX series - Page 13

13
All the data and information contained herein is considered subject to change at any time and at our discretion
ENGLISH
CAME
R
1
2
3
1
2
A
5) Secure the chain-tensioning
transmission from the opposite
side of the ratiomotor in line with
the pinion.
6) Insert the ½ inch chain (CCT) with a length of twice
distance A.
7) Unite the two ends with a
coupling (CGIU).
8) Adjust the chain’s tension with the transmission’s screw
and then tighten the nuts.
9) Secure the chain to the pivot of the fi rst wing with the
chain hitch bracket and screws UNI 5931 M8x30.