CAME CBX series - Page 3

3
All the data and information contained herein is considered subject to change at any time and at our discretion
ENGLISH
#!-%
4.2 Parts description
1 - Gearmotor
2 - Release handle
3 - Lower cap
4 - Protection cover
GEARMOTOR UNIT
ACCESSORIES
1 - C001 - Winch for manually moving sectional doors
2 - C002 - Pendulum release system
3 - C003 - Chain tightener transmission system and brackets
for sliding doors
4 - C004 - Chain tightener transmission system and brackets
for folding doors
5 - C005
- Chain drive system for sectional doors
6 - C006 - Package of two brackets for sectional doors
7 - C007/8 - Adapter for sectional doors
8 - CMS - Release handle with personalized key
9 - CGP - Chain guide with protective guard
10 - CCT - Simple 1/2” chain
11 - CGIU - Coupling for 1/2” chain
3
4
1
2
1
2
9
3
4
5
6
11
#!-%
2
8
10
7
Gearmotor 230V / 400V three-phase with encoder and control boards
001C-BXET - Gearmotor 230V/400V A.C. with encoder
002 ZT5 - Control board
002 ZT5C - Control board with safety block and command buttons
Gearmotor 230V A.C. with mechanical end-stop and control boards
001C-BX - Gearmotor 230V A.C. with mechanical end-stop
002 ZC3 - Control board
002 ZC3C - Control board with safety block and command buttons
Containers and electrical cards for gearmotors 230V
001S4339 - Container
001S4339C – Container with safety release and command buttons
001S4340 - Container
001S4340C – Container with safety release and command buttons
003 ZC5 - Basic electrical card
003 ZM2 - Multi-function electrical card
Gearmotor 230/400V three-phase with mechanical end-stop and control boards
001C-BXT - Gearmotor 230V/400V A.C. three phase with mechanical end-stop
002 ZT6 - Control board
002 ZT6C - Control board with safety block and command buttons
The CBX series comes with the following complementary accessories:
001 CMS - Release handle with personalized key and return cord (7 m long);
001 CGP - Chain guide with protective guard for industrial doors;
009 CCT - Simple 1/2” chain for sliding or folding doors;
009 CGIU - Coupling for 1/2” chain;
001 C001 - Winch for manually moving sectional doors;
001 C002 - Pendulum release system;
001 C003 - Chain tightener transmission system and brackets for sliding doors;
001 C004 - Chain tightener transmission system and brackets for folding doors;
001 C005 - Chain drive system for sectional doors with heights over 5.5 m;
001 C006 - Package of two brackets for sectional doors (specifi c for direct transmission applications);
001 C007/8 - Adapter for sectional doors con Ø 25 mm post (C007) or Ø 40 mm post (C008);
Important! Make sure that the control and safety equipment and accessories are CAME original. Only CAME products are gua-
ranteed to make the system easy to use and maintain.