CAME CBX series - Page 7

7
All the data and information contained herein is considered subject to change at any time and at our discretion
ENGLISH


#!-%
2

1
2
3
1
2
A
B
Fig.3
3) Manually release the ratiomotor by turning the rod clockwise
and move the door to make the pole cavity coincide with that of the
ratiomotor’s cable shaft.
4) Insert tongue A or B depending on the
type of shaft (see fi g. 3) between the two
cavities, insert the bushing on the pole and
secure with the grub screw.
5) Assemble the brackets (Art. C006) and secure them (avoid-
ing blocking them) to the ratiomotor with the supplied screws.
6) Secure the brackets on the wall with suitable screws chosen
according to the shape of the wall to secure the brackets onto
the ratiomotor.
SOLID SHAFT
HOLLOW SHAFT