EasyManua.ls Logo

CAME G3000 - Page 34

CAME G3000
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10 11 E6 TS 1 2 3 4 5 7 CX CY
M N
+ E -
AF
p.
10
10 - Manual code:
FA00028-EN
FA00028-EN v.
1
- 05/2015 - © Came S.p.A. The data and information in this manual may be changed at any time and without notice.
ONLY CLOSE function from control device (NO contact).
Warning: in MAINTAINED ACTION mode, the control
device must be connected to 2-4.
Command and control devices
Antenna with RG58 cable
STOP button (NC contact). For stopping the boom while
excluding the automatic closing. To resume movement either
press the control button or any other control device.
If unused, select 0 (Deactivated) from function F1.
OPEN-CLOSE-INVERT function (step-step) from
control device (NO contact).
WARNING! WARNING! For the system to work properly, before fitting any plug-in card, such as the AF or R800 one, YOU MUST CUT
OFF THE MAINS POWER SUPPLY and, if present, disconnect any batteries.
Fit the AF card to control the barrier
with a transmitter.
OPEN ONLY function from control device with NO
contact.
Warning: in MAINTAINED ACTION mode, the control
device must be connected to 2-3.

Related product manuals