Need help?Do you have a question about the CAME GARD PX Series and is the answer not in the manual?
General| Type | Automatic Barrier |
|---|---|
| Protection Rating | IP54 |
| Operating Temperature | -20°C to +55°C |
| Model | GARD PX |
| Power Supply | 230V AC, 50Hz |
| Duty Cycle | Continuous |
Safety notes for manual unlocking procedures.
Identifies potential hazards and safety risks for users.
Crucial safety guidelines and warnings for installation personnel.
Overview of product features, specifications, and descriptions.
Lists key performance specifications and operational parameters.
General installation overview, procedures, and important warnings.
Procedure for preparing the foundation and anchoring the base plate.
Instructions for adjusting spring tension for proper boom operation.
Setting the open and closed positions using mechanical limit switches.
General guidelines and best practices for electrical wiring.
Details the required input voltage and power supply requirements.
Step-by-step guide for connecting the unit to the mains power.
Connecting safety sensors such as photocells and safety edges.
Introduction to the system's programming and configuration menus.
Procedure for verifying the functionality of safety sensors.
Initial system commissioning and startup procedures.
Setting up two barriers to operate synchronously.
Configuring sequential operation for two connected barriers.
A guide to understanding and resolving system error codes.
To Next Page
