CAME G3000 - Page 38

ESC < > ENTER
F I
{
{
{
F
i
F
i
F
2
F
3
0
i
03
i3
p.
14
14 - Manual code:
FA00028-EN
FA00028-EN v.
1
- 05/2015 - © Came S.p.A. The data and information in this manual may be changed at any time and without notice.
Display
... to exit the menu, wait 10 seconds or
press ESC.
Browsing the menu
The ESC button is for:
- exiting menus;
- cancelling changes.
The < > keys are for:
- moving from one item to another;
- increasing or decreasing values.
The ENTER key is for:
- entering menus;
- confirming or memorizing set values.
PROGRAMMING
Description of programming commands
⚠
During programming, the barrier must not be moving.
To enter the menu, keep the ENTER
button pressed for at least one
second.
To select menu items,
use the arrow keys ...
also for the submenus, use
the arrow keys to select ...
To increase or reduce the
value use the arrows...
... then press ENTER
... then press ENTER to
confirm ..
... then press ENTER