p.
20 - Manual code:
FA00028-EN v.
- 05/2015 - © Came S.p.A. The data and information in this manual may be changed at any time and without notice.
FINAL OPERATIONS
When you are done with the electrical connections and setting up, fit the hatch and fasten it with the screws .
Clock the hatch with the key. Fasten the dome using the screws .
RELEASING THE BOOM
⚠
This procedure must be done with the mains power cut o .
Fit the key into the lock and turn it clockwise. Manually lift the boom and lock it again by turning the key counter
clockwise .
⚠
WARNING! This release procedure is potentially hazardous for users, when for whatever reason, such as the
boom being badly fastened, ripped out or broken during an accident, and so on, the loosened springs no longer
provide the proper balancing action. This could lead to a sudden rotation of the boom attachment and/or of the boom
itself.
To Next Page
Loading...
