CAME G6000T - Description of Parts; Standard Installation

3
4
8
1
6
7
10
2
9
5
11
CAME
1
10
5
6
8
7
4
2
11
9
3
5
p. 5 - Manual FA01581-EN -03/2021 - © CAME ÖZAK. - Translation of the original instructions - The contents of this manual may change, at any time, and without notice.
DESCRIPTION OF PARTS
1. Cabinet
2. Anchoring plate
3. Motor-shaft plate
4. Release lock
5. Gear motor
6. Balancing spring
7. Mechanical stops
8. Limit switch
9. Control panel
10. Adjustable transmission rod
11. Anchoring braces
STANDARD INSTALLATION
1. Barrier with boom
2. Flashing light
3. Warning lights
4. Reflective strips
5. Photocells
6. Photocell casing
7. Small photocell post
8. Fixed rest
9. Coil
10. Control device post
11. Control device (keypad selector, transponder sensor)