CAME GARD PX Series User Manual

p. 27 - Manual FA01313-EN - 02/2019 - © CAME S.p.A. - The contents of this manual may change, at any time, and without notice. - Original instructions
RSE2 speed
Sets the remote connection system communication speed on the RSE2 port.
Configuration >
RSE communication
RSE2 speed 4800 bps
9600 bps
14400 bps
19200 bps
38400 bps (Default)
57600 bps
115200 bps
Create new timer
For timing one or more types of activations chosen from those available.
The function is available only if the 806SA-0120 board is installed.
Timer management Create new timer 1 - Use the arrows to choose the desired function.
Opening / Partial opening
2 - Press ENTER to confirm.
3 - Use the arrows to set the start and end time of the function activation.
Start time / end time
4 - Press ENTER to confirm.
5 - Use the arrows to set the activation days of the function
Select days / Whole week
6 - Press ENTER to confirm.
Remove timer
Removes one of the saved timings.
The function is available only if the 806SA-0120 board is installed.
Timer management Remove timer Use the arrows to choose the timing to be removed.
0 = [Opening]
P = [Partial opening]
Press ENTER to confirm.
Commands
For making the barrier do some commands without the help of control devices.
Commands Use the arrows to select the command to be executed.
Opening
Partial opening
Closing
Stop
Press ENTER to confirm.
Language
Set the display language.
Language Italiano (IT)
English (EN)
Francais (FR)
Deutsch (DE)
Espanol (ES)
Português (PT)
Polski (PL)
Русский (RU)

CAME GARD PX Series Specifications

General

Brand	CAME
Model	GARD PX Series
Category	Automatic Barriers
Language	English