CAME Wing 40 - Fastening the Wing Barrier Leaf; Leaf Removal and Reinstallation; Cable Routing and Leaf Securing

²²
ENGLISH
p.
12
12 - Manual code:
119G3565EN
119G 3 565 E N ver.
2.0
2.0 09/2012 © CAME Cancelli Automatici S.p.A. - The data and information in this manual may be changed at any time and without prior warning.
Position the drive shaft
as shown in drawing A.
Distribute the electrical cables inside the cable passing tube.
Insert the tube.
Reinsert the wing-barrier onto the drive shaft.
Insert the rod to fasten the wing-barrier to
the transmission shaft.
FIG. A
Remove the wing-barrier.
Fastening the leaf