CAME Wing 40 - Calibrating Travel Operations; Automatic Travel Calibration Procedure; Travel Calibration Warnings

ESC < > ENTER
ESC < > ENTER
SC <
SC
SC
<
<
> EN
EN
>
>
cl i
op I
a3
i
=
=
ENGLISH
p.
25
25 - Manual code:
119G3565EN
119G 3 565 E N ver.
2.0
2.0 09/2012 © CAME Cancelli Automatici S.p.A. - The data and information in this manual may be changed at any time and without prior warning
Select A 3.
Press ENTER to confirm.
1) Select 1 and press ENTER to confirm the
automatic-calibration-of-travel mode.
The wing-barrier will move clockwise until
it reaches the mechanical stop.
The wing-barrier will invert the movement
until it reaches the mechanical stop.
N.B.: before calibrating the travel, make sure the area about the arm is free of any obstacles.
Important! While calibrating, all safety devices will be deactivated until calibration is complete, except for the
TOTAL STOP.
Calibrating travel
Wait a few seconds for it to be logged and
displayed.
Warning! The wing-barrier's closing position bisects the opening and closing
strokes.