Need help?Do you have a question about the Cameo NANOSPOT 300 and is the answer not in the manual?
Configures DMX address and channel mode for the device.
Selects and configures internal auto programs and speed.
Activates sound-reactive operation via built-in microphone.
Configures the device to follow a master unit.
Adjusts the orientation of the LED display for overhead mounting.
Inverts the direction of Pan and Tilt movements.
Configures the LED display to turn off after inactivity.
Defines action upon DMX signal loss (e.g., blackout).
Steps to engage IR remote control and activate LED illumination.
Explains DMX connection principles and protocols for device communication.
Details on connecting multiple DMX devices sequentially in a chain.
Information on DMX cable types, wiring, and pin configurations.
Explains the necessity and use of terminating resistors in DMX chains.
Guidance on using adapters for connecting DMX devices with different connector types.
Details on product warranty conditions and limitations of liability.
Instructions for correct, environmentally friendly disposal of the product.
Information regarding the product's compliance with EU directives.
General| Brand | Cameo |
|---|---|
| Model | NANOSPOT 300 |
| Category | DJ Equipment |
| Language | English |
To Next Page
